Save $20
on any order of $599+
Save $30
on any order of $999+
Save $50
on any order of $1499+
View All Coupon Codes
This item qualifies for Free Ground...
83033972, STCON3 4-Ring Conductivity Electrode
The STCON3 conductivity probe has a built-in temperature sensor which is 30kΩ. When using STCON3, please consider the following: 1. Make sure the plastic shield is in place when measuring. 2. Be sure the solution reached the line on the plastic shield and below the vent hole when measuring. 3. To prevent carry over from high to low conductivity solutions, rinse with distilled water between and after measurements. 4. Make sure the cell chamber is bubble-free. 5. Allow sufficient time for the sensor to stabilize when measuring samples at different temperatures. A manual end-point is advised.
We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.
* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).
Note: Please read description carefully. Do not base your order on the picture presented.